12 best steps to hack a WiFi.

For those whose neighbors friends and family members always leave their WiFi on with password or those of you that sees different kinds of WiFi network wherever you go or work.

Well, Do you know that You Can Hack WiFi from your Android Phone. Surprised right, Well, It’s True ! You can easily hack WiFi from your phone in Just few minutes so without wasting time.

So what you need to do is to install some few applications and you are as good to go in enjoying free internet from your those that put password on thiers.

From this app i can tell you that i have hacked almost 90% WiFi wherever i go. You just need to have patience and follow the instructions accordingly as many of you tend to get frustrated and complain when it doesn’t work or get errors. So Let’s begin.

Requirements needed:

1.An Andriod Phone or Tablet.

2.BusyBox Pro Installed Download from here .

3.WPS/WPA Tester Apk

4.Terminal Emulator

5.Lastly Your PATIENCE and ability to try the work and steps.

Note ;for quality assurance get apps from playstore

Before will hit our target let look at cracking. Before hacking

Start with WIFI Cracking

But before start WIFI hacking I let you know that this app can only hack WPS enabled security WIFI.

this app doesn’t work in some devices due to their unsupported kernel version.

In Latest Routers app can’t crack the WIFI password because Router’s PIN Not saved in app (Hopefully in next update of app more routers pin can be added).

Depends on Router pin if it saved in app you can easily crack the wifi. Except these hurdles this app can hack almost 80 to 90% wifi password that have WPS Security.

Follow These easy steps carefully:

1. First Install Busy box pro apk and Install it. Then open the app and wait for Supersu app popup grant permission to app by clicking on grant button. You will see like this see Image After that you see, you will see busybox is not installed.

2.Click On Grant button

3.Click on install button

4.Click below this text “will be installed to” and select the path where to install buysbox choose system/bin (! Important).

Note :Don’t install it on system/xbin.

5.Now click on install button and wait for seconds you will see popup It’s Look like buysbox is successfully installed close this and slide the tab if busybox is installed successfully you will see something
Successful installed busybox.

6.Great You Done Half process now install the both apps first WPA/WPS tester and then Terminal Emulator.

7. Open WPS/WPA Tester and give grant access to app. Click on three dots and menu will appear and click on Check wpa_cli It show a popup wpa_cli commands not installed. click on Install experimental button and wait now again click on check wpa click it shows a tooltip text wpa click OK!

8.Great ! Now open Terminal Emulator and type su and hit enter give grant access to terminal emulator and close the application.

9.Open WPS/WPA tester app and click on green button in top it’s enable the wifi interface and then scan the wifi if WPS WIFI is available in your area then it’s shows with green lock button.

10. Now click on wifi name it’s shows a popup with three pin available. Select always default pin then click on Verbose button it’s open the Terminal Emulator hold and press on the screen it’s will show you paste option. Paste the command (already copied just need to paste) and hit enter wait for sometime !

11.Now You auto connected to wifi . If you want to know password click on three dots go to password option and click on it. it’s shows the WIFI password.

12. Enjoy ! the free WiFi and browse with no disturbance from anybody.

Tested devices :Xperia E1 (Single & Dual Sim), Galaxy S3 Neo (Stock Rooted not in CM 12/12.1), Moto G Series, YUPhoria and many more if you know tell in comments I’ll add in list.

Popular well Known Issues :

1.Sometime default pin is not work in Terminal emulator it’s repeat the ssid=”” command or WPS-AP Available command.

Solution :close the window of emulator go back to WPS Tester click on app and try with other pins It’s solved the problem.

2.If WIFI automatically not connected then during running command you will see ssid=”Targeted wifi name”.

Solution :If You see this go back to app click on show password scroll down you will see password tap on it and manually connect it by entering WIFI password.

3. Sometimes WIFI in settings show WPS avaible WIFI but app not show.
Soulution; condition reboot the phone or get go to airplane mode in your phone for 5 sec. and then enable the wifi again through WPS tester app.

3.If You fresh install busybox but it’s showing busybox installed in system/xbin then

Solution :find busybox uninstaller.zip from xda (for every phone may be it’s different) . Flash zip file from recovery again install busybox and now install it to system/bin.

4.Sometimes Terminal Emulator shows Unknown username or pid error and IFNAME=unknown command

Solution :in this situation try above method if it’s showing again error then may be your kernel don’t support this wpa click commands

(Mostly happen in Gionee P series mobiles , CM12/12.1 for Galaxy s3 Neo Rom)

Share to let your friends know about it.

Or simply comment your problem.